Tuesday 6 October 2009

Friendly plastic play

Carol and I have been playing with Friendly Plastic today. One thing we did was make some decorated Friendly Plastic strips.

Take a pale coloured strip of FP - white, mother of pearl, pale gold. Drip alcohol inks onto it - the brights work well. Move the inks around with some kind of tool - I used the end of a fine straw. I dripped more ink on and blew some of it around.



The colours I used were POOL, CLOVER, and PURPLE TWILIGHT. The finished strip looks pretty just covered in the inks.


If you want to go a step further, take a Sakura Souffle pen, and doodle all over the inked strip.
You can now use the decorated strip in your projects.


We also made some beads out of scrap FP - some of the pieces we had managed to turn into grey mush during earlier failed experiments! Drop the bits into the warm water (60-70 degrees C or 140-160 degrees F) for a few moments until they soften. Lift out, and roll together between the palms of your hands. Voila, a very quick and easy bead.


Drop the bead into the cold water bath, and after 30 seconds or so, pierce it with a needle tool to make the hole through the middle (you can also drill the beads once they are fully cold if you prefer).


Give the bead a quick blast of a heat gun, just until the surface turns shiny, then roll it in a box of foil flakes.


Lift the bead out of the flakes, leave for a while, then gently rub the loose flakes off. Enjoy using your glitzy metallic bead. You could seal it if you like.


You can use the same decorative technique, but rolling the bead in PearlEx instead of foil flakes - gives a completely different but equally yummy effect!

2 comments:

  1. Sorry, the pictures I took turned out blurry. These are so much more fabulous in real life.

    ReplyDelete
  2. Look good to me, love the one with the metal flakes

    ReplyDelete

Guestbook

Copyright

Please note that I assert myself as the creator of all art on this site (unless I credit another artist) and retain copyright of all artwork posted on this site