Saturday 27 September 2008

Stamp versatility swap

The idea of this swap was to explore how the same stamp can be used to create different 'looks'. We each had to create 3 cards or ATCs using the same stamp in different ways. here's my take on it, using a stamp by Invoke Arts:

Background - Reynolds freezer paper used in a 'spray box', which has accumulated overspray from previous projects on non-plasticised side. Adhere to cardstock using gel medium.


Embellishment - heat fun foam with a heat gun until it begins to curl, stamp into fun foam and hold the stamp down as hard as you can for about a minute, until the foam cools. Remove stamp, cut around image. Paint the fun foam with 2 coats of a paint intended for fabrics - I used Stewart Gill, but Lumieres would be fine. Once dry, gently rub some Rub'n'Buff or Treasure Gold over the raised areas to highlight them. Adhere to the background using glue dots.



Background - cover cardstock with small pieces of metal tape, burnish, then use a Ten Seconds Studio metal roller tool to add texture. Rub with Rub'n'Buff or Treasure Gold to dirty it up a bit, then add colour with a Brilliance Inkpad.

Embellishement - fold a piece of Fantasy Film (ART Glitter Institute) or Glitterati (Stewart Gill) in half and put into a hot laminating pouch. Laminate, then stamp image using Stazon ink. Cut around image once ink is dry, and adhere to background with gel medium. The scan doesn't show the iridescence that is visible in real life.




Background - coat the card with Golden Iridescent Copper paint. make fabric paper - lay a thin cotton fabric (muslin in the US, 'lawn' in the UK) onto a plastic sheet, coat with diluted PVA glue - the cheaper the glue, the better. Add pieces of thin gift wrapping paper, leaving gaps between, coat with more diluted glue, add a sheet of white tissue paper, smooth down, add more diluted glue, and while the glue is still wet, add very diluted Golden fluid acrylic paints (other acrylics will also work, but diluting them until they are the thickness of ink may render some cheaper paints fairly colourless as they don't have enough pigment). leave overnight to dry. Overstamp with Brilliance ink - I used Cosmic Copper and a Stamp Camp stamp. Glue to felt using PVA glue, cut to size, adhere to cardstock and edge with 3 dimensional paint, which gives a 'faux solder' effect.

Embellishment - lightly colour some translucent shrink plastic with pigment ink, stamp image using Brilliance ink - I used Pearlescent Olive. Leave overnight to dry. Cut around image, shrink with heat gun, adhere to fabric paper with glue dot. Take a small metal tile, colour with alcohol inks, edge with copper tape, stamp part of image with Stazon, adhere to fabric paper with glue dot.

I had lots of fun experimenting, playing with techniques old and new, and combining techniques. I hope the recipient likes the results!

3 comments:

  1. Hi Adrienne

    Love your work both here and on the Krafty Lady Art Mold site.

    Just wanted you to know about a Friendly Plastic challenge that you and your blog visitors may be interested in entering.

    Here's the link to all the info:
    AMACO Friendly Plastic Challenge.

    Feel free to spread the word to everyone!

    cheers

    Helen Bradley

    ReplyDelete
  2. Gorgeous Adrienne
    please can you tell me what you mean by "make fabric paper"???.I've just uploaded to my blog a Fantasy Film Opals card that I ran thru the CB...what fun and oh so pretty
    hugs
    Annette In Oz
    http://goannafive.blogspot.com/

    ReplyDelete
  3. Love all three of these Adrienne, some great textures and colours

    ReplyDelete

Guestbook

Copyright

Please note that I assert myself as the creator of all art on this site (unless I credit another artist) and retain copyright of all artwork posted on this site