This was quite a quick project using fabric paper. I used remnants from 3 sheets of fabric paper I'd made a while ago - deep pink, purple and blue. I backed them all with felt, cut shapes out and sewed around the edges. I did a bit of free motion embroidery on the blue piece.I coloured some paper flowers, then layered them with beads and sequin flowers and sewed them to the fabric paper shapes, then added more sequin flowers, beads and ribbon. A couple of squares with flowers and brads, and a few tiny tags with charms and brads finished the piece off.
It will be going to a new home at the end of the month, I hope whoever gets it likes it.
I have been on a couple of Angie Hughes courses at Ledbury Artspace recently. The first course was all about working with velvet, transfer foils, organza and stitch. I have a half finished piece from that course, but as I have very little experience of free motion embroidery I wanted to get more before I try and finish it off.So, I thought I'd make a fabric postcard as a practice piece.
I took some red cotton velvet and masked out some rectangles then ironed bondaweb all over it. I covered it with organza and stitched around the rectangles, then used vermicelli stitch to cover the area around the rectangles, using a variegated thread. I hand sewed little flower sequins and beads into the rectangles. Finally, I backed the piece with pelmet vilene and finished the edges with a zig zag stitch. Frankly, I was surprised at how well it went, because I still don't feel competent with machine embroidery!
Altered Element sent me some Paverpol fabric stiffener, some Paverplast, and some 'fabric' for use with Paverpol which is made from beaten tree bark (looks a bit like a very large piece of flattened silk rod!). These materials are all way out of my comfort zone, and I wasn't sure what the heck to do with them!I surfed the net to see what other people had done with Paverpol, and it was interesting to see, but not 'me'. So I had a little play, and here are the results of my experiments.I wanted to see if Paverpol could stiffen fabric yet maintain transparency. And the answer is - sort of! I covered a glass bowl with cling film, then draped organza over the top. I cut some excess organza away, then applied the Paverpol fabric stiffener with a paintbrush, and left to dry. Once dry, I trimmed the 'brim' into a flower shape. This is the result:
It's sort of pretty, but a bit flimsy. I had planned to add some hand embroidery - maybe some french knots or lines of stitch form top to bottom, but it is too flimsy for that. I may yet add some curved lines of Friendly Plastic all around the outside of bowl sides, to make a sort of supporting framework, and perhaps do some gold stitching afterwards. If I can find time and my mojo at the same time!My second experiment with Paverpol was to use it to stiffen and adhere fabric to a metal tin - every other glue I have tried has left bubbles or marks, so I was very pleased to see that the Paverpol left a flawless surface. This was very easy to do - just cut a straight edge at the bottom of your fabric, add Paverpol to the tin itself and start wrapping your fabric around the tin, coating with Paverpol as you go. I then took some thin strips of gold Friendly Plastic, heated them in a puddle of water in my melt pot, and squiggled them around onto the tin. The Friendly Plastic adheres to the fabric really easily - which can be both blessing and problem LOL.I love the fabric I used - I've been hoarding it for ages!
I finished it off by adding 3 turquoise Friendly Plastic 'flowers', made by laying a strip of FP on a non stick sheet, heating with a heat gun, using a cutter to cut the shape, and allowing to cool completely before removing the shape. I laid the flowers on top of the gold squiggles, heated it all with my heat gun and used an embossing tool to make a centre and some depressions in the petals. I rather like this!
I will try to play with the Paverplast soon but that may be more of a challenge...
